| TS-EN |
Technical
Characteristics |
Standard TS-EN
14411 Annex G Group Bla |
Kalebodur
Porcelain Floor Tiles |
| ISO 10545-2 |
| Length and Width (L=cm, S=cm²) |
190 < S < 410 ± 0.75%
S > 410 ± 0.6% |
± 0.4% |
 |
| Thickness |
± 5% |
± 4% |
|
| ISO 10545-2 |
Rectangularity |
±0.6% |
±0,4% |
| ISO 10545-2 |
Straightness of Sides |
±0.5% |
±0,3% |
| ISO 10545-2 |
Surface Flatness |
±0.5% |
± 0,3% |
| ISO 10545-3 |
Water Absorption |
0,5% < E < 3
Individual Max. 3,3% |
< 3,0% |
| ISO 10545-4 |
Modules of Rapture (N/mm²) |
Min. 30
Individual Min. 27 |
Min. 30 |
| ISO 10545-4 |
| Breaking Strength, in N |
|
| Thickness > 7,5 mm |
Not less 1100 |
Not less 1100 |
|
| Thickness < 7,5 mm |
Not less 700 |
Not less 700 |
|
| ISO 10545-6 |
Resistance to Deep Abrasion
Unglazed Tiles Only |
Max.175 mm³ |
- |
| ISO 10545-7 |
Abrasion Resistance |
Report abrasion class and cycles
passed |
- |
| ISO 10545-8 |
Linear Thermal Expansion Coefficient |
Test method available |
Pass |
| ISO 10545-5 |
Impact Resistance |
Test method available |
- |
| ISO 10545-9 |
Resistance to Thermal Shock |
Test method available |
Pass |
| ISO 10545-11 |
Crazing Resistance in Glazed Tiles |
Required |
Pass |
| ISO 10545-12 |
Frost Resistance |
Required |
Pass |
| ISO 10545-13 |
| Resistance to Chemicals |
|
Resistance to low concentrations of acids and alkalis
Glazed tiles - unglazed tiles |
Manufacturer to state classification |
Pass |
|
Resistance to high concentrations of acids and alkalis
Glazed tiles - unglazed tiles |
Test method available |
Pass |
|
| ISO 10545-13 |
| Resistance to Household Chemicals and Swimming Pool Salts |
|
| a) Glazed tiles |
Min. GB |
Pass |
|
| b) Unglazed tiles |
Min. UB |
- |
|
| ISO 10545-14 |
| Resistance to Staining |
|
| a) Glazed tiles |
Min. Class 3 |
Pass |
|
| b) Unglazed tiles |
Test method is available |
|
|
| DIN 51130 |
Ramp Slip Resistance (Oil / Wet) |
Where required |
- |
| The numbers beside Kalebodur Ceramic Tiles indicate the abrasion resistance of the ceramic surface according to Turkish and European Standard TS-EN ISO 10545-7. |
| P.E.I - 1 |
Suitable for walls and bedroom and bathroom floors. |
| P.E.I - 2 |
Suitable for light traffic environments like the floors of a house. |
| P.E.I - 3 |
Suitable for moderately heavy traffic area floors like the entrance and the corridor. |
| P.E.I - 4 |
Suitable for heavy traffic area floors like restaurant, shopping stores, etc. |
| P.E.I - 5 |
Suitable for floors subject to heavy foot traffic and abrasion, such as shops, hotels, restaurants, offices, schools, exhibition halls, etc. |
|
